Alububble 2906 (Single sided Alububble) Overview

Alububble® is a superior performance radiant barrier material, simple to use and cost effective.

This product is manufactured using a modern sophisticated continuous laminating process which consists of a layer of low density Polyethylene air cells laminated on both sides with aluminium foil or alternatively on one side with a white polyethylene layer which provides an aesthetically pleasing finish to the underside.

Alububble® uses the thermos principal of providing a reflective barrier along with adjacent air space to keep the building cool in summer and warm in winter.

Alububble® will not propagate fire and does not present a fire hazard when installed in a building.

Note: For Fire Reports & Installation please see Technical Information on left-hand side menu

Product Specifications

Architectural Specification:

4mm Alububble 2906, D10, White bubble facing with foil backing. 

Use in conjuction with straining wire placed at 383mm centres and Double Sided Tape as per the manufacturers installation instructions.

Alububble 2906 Technical Datasheet

Applications

Domestic:

• Water Vapour barrier in 'Under Roof Tile or Roof Sheeting' applications
• In conjunction with Air Gaps as a Radiant Barrier Insulation material attached to Trusses
• Retrofit to existing buildings

Industrial:

• Over Purlin, in conjunction with a thermal block as a Radiant Barrier insulation and Water Vapour Barrier.

Fire Properties

Tested to SANS 428 and awarded a B/B1/2/H (USP) (No Sprinklers).

Quality Management System

Africa Thermal Insulations (Pty) Ltd products are manufactured according to ISO 9001:2008 Quality Management System

WARNING:    A leaking flat roof could cause condensation and corrosion to occur which may damage the product and will negatively affect its thermal properties.

Transportation and Care

To ensure that ALUBUBBLE® remains in pristine condition, the rolls must be transported in a suitable, fully enclosed truck. They should also be stored under cover to protect them from direct sunlight and rain. Rolls should be stacked on their sides.  Africa Thermal Insulations (Pty) Ltd cannot accept any claim for replacement for material if the above instructions are not adhered to.

Warranty:    Alububble is not suitable for exposed, exterior applications. The manufacturer, Africa Thermal Insulations (Pty) Ltd,  guarantees the prime quality of the Alububble product for 15 years from the date of installation (in accordance with the requirements of SANS 10400 Building Regulations),  on condition that the product has been correctly installed in accordance with the manufacturer’s Installation Instructions and provided that the roof has not leaked or been tampered with in any way.
The guarantee does not cover the discolouring or deterioration of the product due to it being installed in a corrosive or contaminated environment.
The extent of the liability shall be restricted to the replacement of the product only and does not include the cost of removing and refitting the roof.

>> Download Alububbble Technical Datasheet

Alububble 2906 Advanced Benefits and Features

• Protects your roof space from heat build up due to radiant heat penetration by acting as a heat barrier to protect all services within the roof space from from drying out, cracking and degradation due to UV and Solar heat gain.
• An effective water vapour barrier under roof tiles or sheeting.
• Improves the performance of bulk insulation by effectively reducting the temperature within your roof space.
• Non Toxic
• Non Carcinogenic
• Does not attract rodents
• Has no fibres
• Easy to install – No safety equipment needed during installation
• Reduces Dust penetration into the roof space.

Environmental Data Table

Architectural Specifications

4mm White Alububble 2906, D10 - White bubble with foil backing.

In conjuction with:

• PVC coated straining wire placed at 383mm centres
• 24mm / 48mm double-sided tape